Latest posts

When and Where to Use Solid Oak Furniture Panels

A solid oak furniture panel, also called oak furniture board, is a wide, flat board made by gluing strips of oak edge to edge. It gives you a ready-made solid oak surface to cut and build with. This guide covers what our panels are, where they work well, when another product is a better choice, and how to cut, fix and finish them so they stay flat and looking good.

What is an oak furniture panel?

Our solid oak furniture panels are full stave boards, edge glued in a high pressure laminating press in our own Midlands workshop and sanded ready for finishing. They are kiln dried, at 8–12% moisture content. Full stave means each strip runs the full length of the panel, so there are no finger joints and the lines stay clean.

  • Species. European oak, American white oak and American red oak. American white oak is paler, with a straighter grain and a less characterful look than European oak. American red oak has a slight red tinge.
  • Grades. A/B panels are prime grade on the A face and character on the B face. B/C panels are character grade on one face and rustic on the other. Rustic panels have knots, sapwood, checking, minor splits and colour variation on both faces.
  • Sizes. The Solid European Oak A/B Grade Furniture Panel comes 16, 20, 25 or 36 mm thick (16 mm only in 1200 x 600 mm), in lengths from 900 to 2400 mm and depths from 300 to 1200 mm, depending on thickness and length. American white and red oak panels are 22 mm thick. Each listing shows the sizes you can order, and custom sizes are available on request.

Not sure which oak or grade? Order Solid Wood Indoor Joinery Stave Samples first. Up to two pieces can be posted, and the charge is refunded when you order the material.

Where to use oak furniture panels

Our panels are made for furniture and cabinet making. Good uses include:

  1. Shelving and bookcases. Cut a panel into shelves, sides and tops for a freestanding bookcase or a run of fitted shelves. For a single wall shelf, our ready-made solid oak shelves may save you the cutting.
  2. Tabletops. Dining tables, coffee tables, console tables and bedside tables. Rustic panels are described on our listings as perfect for table tops and rustic furniture. For a ready-made top, see our solid wood table tops and table legs.
  3. Desks. A panel makes a clean, solid desktop on a frame or on drawer units.
  4. Cabinet carcasses and doors. Sides, tops, bases and shelves for sideboards, wardrobes and units, and flat panels for doors. A/B grade lets you face the prime side outwards.
  5. Bespoke pieces. Chests, headboards, benches and display units.

When to choose something else

  • Kitchen worktops. Our full stave oak worktops are made in worktop widths and in lengths up to 3500 mm. Our guide to oak worktops covers care and use.
  • Window boards. Our oak window boards and sills are made for the job.
  • Outdoors. Furniture panels are indoor joinery, so we don't suggest them for garden furniture or anywhere they will get wet.
  • Structural work. Panels are not beams or joists. Don't use them to carry building loads.

Before you start: let the panel settle

Bring the panel into the room where it will be used, lay it flat on level bearers with air around it, and leave it to settle for a minimum of one week, preferably longer, before you cut and fix it. Keep it away from radiators and direct sun while it waits.

Allow for movement

Solid oak takes up and gives off moisture with the seasons, so it gets slightly wider and narrower across the grain. Length hardly changes. Plan for this:

  • Don't glue or screw a panel rigidly across its full width to a frame. Fix tabletops so the width can move.
  • Fix shelves and cabinet parts so the panel can move across its width.

Cutting safely

  • Plan the cuts. Mark out the good face first, keep the grain running the way you want it, and check every measurement before you cut.
  • Use a sharp, fine-tooth blade. A track saw or circular saw run against a straight edge gives a clean, square cut on a wide panel. Support both sides of the cut so the offcut doesn't drop and split the edge.
  • Protect yourself. Wear eye protection and hearing protection, and use dust extraction and a dust mask suited to fine wood dust. Oak is a hardwood, and the HSE says wood dust can cause asthma and hardwood dust can cause cancer, particularly of the nose.
  • Seal cut edges. Finish fresh cut edges along with the rest of the panel.

Need a size you can't cut yourself? Custom sizes are available on request, and we can cut a panel to your cutting list. Call our sales team on 01536 267107.

Finishing

Our panels are planed and sanded with a fine grit paper, but they may still need some further finishing before you apply a stain, lacquer, oil or varnish. Oiling can show up minor marks that you can't see on bare wood, so check the surface in raking light and sand out anything you find first. A hardwax oil such as our Treatex hardwax oils suits tabletops and shelves; see all our wood oils and finishes. Always follow the maker's instructions and test on an offcut first.

Tips

  • Lay out all your pieces on the panel before cutting, so grain and colour flow across a cabinet front.
  • On an A/B panel, keep the A face for the side you see.
  • For a cleaner modern look, choose American white oak. For warmth and character, choose European oak, or rustic grade.
  • Also look at our ash, beech and Douglas fir furniture panels.

Frequently asked questions

What is the difference between furniture board and plywood or MDF?

Our furniture board is solid wood all the way through: full length strips of oak glued edge to edge. Plywood is built up from thin layers of veneer, and MDF from compressed wood fibres.

Are oak furniture panels finger jointed?

No. Ours are full stave, so every strip runs the full length of the panel.

What thickness can I get?

European oak panels come 16, 20, 25 or 36 mm thick (16 mm only in 1200 x 600 mm). American white and red oak panels are 22 mm thick.

Can I use an oak furniture panel outdoors?

We don't suggest it. Our panels are made for indoor furniture and cabinet making.

Do the panels come finished?

No. They are planed and sanded with a fine grit paper, ready for your own finish, though some further sanding may still be needed.

Can I get a custom size?

Yes. Custom sizes are available on request, and we can cut a panel to your cutting list. Call our sales team on 01536 267107.

Ready to start?

Browse our solid oak furniture panels and all furniture panels, order stave samples to compare the oaks, or call our sales team on 01536 267107 for help choosing a species, grade or size.