Kiln Dried Douglas Fir Internal Tongue and Groove Cladding, image 1 of 1

Kiln Dried Douglas Fir Internal Tongue and Groove Cladding

MODEL DFITG

From £32.49 + VAT
Tax excluded
  • Striking colour from pinks and browns to creams
  • A strong, hard-wearing British softwood
  • Kiln dried to 8–12% moisture, for internal use
  • Tongue and groove boards lock together for a flush, tidy finish
  • Choice of First or Character Grade, with optional end matching for quicker fitting and less waste
  • 142 x 20 mm boards
Size (mm): 142 x 20
Grade: Character
End Matching: No End Matching
Quantity

TOTAL PRICE FOR THIS ITEM £32.49 +VAT

In Stock

100% Secure Payments

Our Douglas Fir Internal Tongue and Groove Cladding is tongue and groove cladding in Douglas fir, for internal use.

See our full range of kiln dried Douglas fir cladding, or browse all vaulted ceiling board cladding.

About Douglas fir

Colour varies from pinks and browns to creams depending on where in the tree the board is cut. Dark brown knots can loosen as the wood dries, and resin patches may ooze a little at first and in later hot summers.

Kiln dried to 8–12% moisture content, for internal use.

Profile and fitting

Boards fix together by inserting the tongue into the groove. Fitted horizontally as standard, can also be fitted vertically. Fit horizontal boards tongue uppermost so moisture runs off. Tongue 12 × 8 mm.

Grades and options

  • First Grade: mostly clear of knots, with some knots up to 5 mm allowed and a small amount of sap on the underside only.
  • Character Grade: knots, splits, sap, historic insect damage and other defects without limitation, as long as they don't affect usability.
  • End matching (tongue and groove on the board ends) lets you place joints where they fall rather than on a batten, which speeds up fitting and reduces wastage.

End matching available

End matching is a paid option you can choose from the dropdown. The board ends are machined to interlock end to end as well as along the edges, so joints can fall between battens instead of having to land on one. That makes fitting faster, cuts waste because offcuts can be used, and gives a neater finish with no visible butt gaps.

Sizes and pricing

  • 142 x 20 mm (visible face 130 mm): Character £32.49 / Character end matched £44.99 / First £39.99 / First end matched £52.49 per m² ex VAT
  • Supplied in random lengths between 1200 mm and 3600 mm.
  • Set lengths are available for an extra charge using Set lengths (Internal Cladding): surcharge £15.00 per m² ex VAT up to 3500 mm, £18.00 per m² ex VAT above 3500 mm. Add the same number of m² of set lengths as cladding.

Specifications

SpeciesDouglas fir
OriginBritish
ProfileTongue and groove
UseInternal
Grade(s)First, Character
Sizes142 x 20 mm
LengthsRandom 1200–3600 mm (set lengths extra: £15.00 per m² ex VAT up to 3500 mm, £18.00 per m² ex VAT above 3500 mm)
Moisture contentKiln dried, 8–12%
TreatmentNone (untreated)
Finish as suppliedMachined
Priced perm², ex VAT

Finishing and aftercare

Supplied untreated. To protect the surface or hold the colour, see our cladding treatments.

Good to know

  • Natural timber varies: expect some differences in colour and grain from board to board and from the photos.
  • Sizes are nominal and can vary slightly with moisture content.
  • Not sure? Order up to two cladding samples first.
  • Questions? Please contact our Sales Team on 01536 267107.
DFITG
5000 Items

You might also like