Kiln Dried Oak Half Lap Internal Cladding
Carefully machined kiln dried oak half lap cladding. Recommended for internal use due to the reduced likeliness of shrinkage or movement.
115mm x 22mm (Visible Face 105mm)
142mm x 22mm (Visible Face 132mm)
PRICED PER SQUARE METER
Our kiln dried oak half lap internal cladding can be used internally due to the reduced possibility of shrinkage or movement. Our carefully machined Half Lap Cladding is the perfect choice should you require a clean linear appearance. Unlike a shiplap profile, with its distinctive shadow lines once fitted, the halflap profile offers a more smoother finish with its slimmer shadow gap.
Your boards will be supplied untreated. No treatments are required, however if you wish to preserve the supplied colour a little longer or use a weather resistant sealant, please take a look at our Treatex range. Should you wish to leave it to age gracefully, it will eventually turn to a beautiful silvery grey colour as the suns rays do their work.
Ready to fix and available in two options - First and Character Grade:
First Grade is sorted to include only the clearest (most knot free) boards with the straightest grain possible. A perfect choice for all modern and contemporary applications.
Character Grade will have a mixture of all top four grades, 1 through to 4 - some clear of knots and some straight grain, others with knots and some sloping grain. A perfect choice for all traditional/rustic applications, it gives a less uniformed look, without compromising its excellent durability properties.
We offer the following section size with an 10mm recess:
- 115mm x 22mm - The overall width is 115mm, with the visible face measuring 105mm
- 142mm x 22mm - The overall width is 142mm, with the visible face measuring 132mm
This profile is priced per square metre and comes in random lengths between 1200mm and 3600mm unless otherwise specified for an additional charge:
- Set lengths up to 3500mm - £4.00 extra per square metre exc VAT
- Set lengths above 3500mm - £8.00 extra per square metre exc VAT
This can be done by adding the 'Set lengths (Cladding)' product to your basket (1 quantity = 1 square meter of cladding). You will need the same amount of cladding and set lengths in your basket to get the set lengths that you need so make sure to double check you have added the correct quantity.
Please contact our Sales Team on 01536 267 107 should you have any issues.
Please ensure when ordering that you make an allowance for wastage. We recommend adding an additional 10% over and above your initial requirements.
Still unsure? We offer up to two samples of our cladding boards for a £5 inc VAT postage charge. Should you wish to then purchase cladding boards that are the same product as your samples, we will reimburse you the £5 postage charge upon ordering!*
*Terms and Conditions apply