EasyFit British Douglas Fir Softwood Corner Pergola Kit | Buy Online from the specialists at UK Timber Limited
  • Up to -25%
  • New
EasyFit British Douglas Fir Softwood Corner Pergola Kit | Buy Online from the specialists at UK Timber Limited
search
EasyFit British Douglas Fir Softwood Corner Pergola Kit | Buy Online from the specialists at UK Timber Limited

EasyFit British Douglas Fir Softwood Corner Pergola Kit - FREE DELIVERY

MODEL EFCP-DF

CONDITION NEW

£439.99
From £329.99 + VAT Save 25%
Tax excluded

EasyFit British Douglas Fir Softwood Corner Pergola Kits, easy to assemble and comprising high-quality components.

  • Corner (right-angled triangle) footprint: designed to fit neatly into the corner of a garden, patio or deck.
  • Sawn and machined on-site right here in the Midlands.
  • The most durable of domestic softwoods, beauty as standard and requires no treatment.
  • Planed all round to a smooth, visually appealing finish.
  • Shipped with pre-cut notches and all required fixings.
  • Simple to install, DIY friendly slot together system.
  • Select post size and rafter end profile in the dropdowns.
  • Choose from 3 rafter end designs: Chamfered, Square Edged and Sleek.
  • Stock sizes 2400, 3000 and 3600 mm per side (custom sizes via the Pergola Configurator).
  • FREE DELIVERY TO MAINLAND UK*

*except the Scottish Highlands (including IV and KW postcodes) and British Isles where additional charges may apply.

Size (mm): 2400 x 2400
Rafter Profile: Square Edged
Post Size (mm): 2400 x 100 x 100
Quantity

TOTAL PRICE FOR THIS ITEM £329.99 +VAT

In Stock

100% Secure Payments

These corner kits are a must-have purchase should you require a simple and effective solution for outdoor entertaining in the corner of your garden, or as a support for the growth of climbing plants.

The components of your kit are made from untreated British Douglas Fir (100 x 50 mm members) that has been pre-cut and machined, eliminating the need for annual retreatment and meaning that you will only require basic tools to assemble using the supplied instructions.

These purposely designed, simple to fit, slot together pergolas really are a dream to construct. Just slot them together in their pre-cut slots to build the structure, then for additional strength pop a screw (supplied) at each joint.

Instructions
Assembly drawings (PDF) are in the Downloads tab below

Our Standard Corner Pergola Kits are available in three stock sizes and contain the following depending on the size required:

2400mm x 2400mm corner

  • 3 x Douglas Fir Softwood Notched Posts 100mm x 100mm - (Selected Length from Dropdown)
  • 2 x Douglas Fir Softwood short bearers 100 x 50mm (pre-cut and notched)
  • 1 x Douglas Fir Softwood long bearer 100 x 50mm, one piece (pre-cut, 45° ends)
  • 2 x pairs of Douglas Fir Softwood rafters 100 x 50mm (4 rafters, pre-cut and notched)
  • 14 x Timber Titan screws 63mm

3000mm x 3000mm corner

  • 3 x Douglas Fir Softwood Notched Posts 100mm x 100mm - (Selected Length from Dropdown)
  • 2 x Douglas Fir Softwood short bearers 100 x 50mm (pre-cut and notched)
  • 1 x Douglas Fir Softwood long bearer 100 x 50mm, one piece (pre-cut, 45° ends)
  • 3 x pairs of Douglas Fir Softwood rafters 100 x 50mm (6 rafters, pre-cut and notched)
  • 18 x Timber Titan screws 63mm

3600mm x 3600mm corner

  • 6 x Douglas Fir Softwood Notched Posts 100mm x 100mm (3 corner posts, 2 mid-posts and 1 centre front post) - (Selected Length from Dropdown)
  • 2 x Douglas Fir Softwood short bearers 100 x 50mm (pre-cut and notched)
  • 1 x Douglas Fir Softwood long bearer 100 x 50mm, one piece (pre-cut, 45° ends)
  • 3 x pairs of Douglas Fir Softwood rafters 100 x 50mm (6 rafters, pre-cut and notched)
  • 18 x Timber Titan screws 63mm

Optional wind braces and post supports are available as add-ons in the Pergola Configurator.

Wind braces are offered on all our pergola kits: choose a straight wind brace or a curved wind brace.

EFCP-DF-2400-2400x100-SQ
5000 Items

You might also like