Air Dried Oak Rain Screen Cladding

Air Dried Oak Rain Screen otherwise known as Splayed Cladding is the perfect choice should you require bold shadow lines, as well as infallible weather protection, along with the natural durability and stunning grain of Air Dried Oak.

Air-Dried Oak (Seasoned) is Oak that has been dried since the tree was felled, either by spending 3-5 years exposed to air or by accelerated drying inside a kiln. This process reduces the moisture content to approximately 20-30% compared to that of our other oak cladding, making it more stable than a fresh sawn cladding product and less prone to shrinkage.

The boards used for this cladding are characterful and may have a small amount of sap to the underside, sound knots without limitation and occasional historic insect damage. If a higher grade with a more contemporary, straight grained, knot free appearance is required please take a look at our first grade offerings.

Being a natural product, you may also experience some colour variation and when in place, some natural movement as the timber adjusts to the changing seasons. These characteristics are to be expected and will give the beautiful natural distinctive appearance of oak.

This cladding is recommended for external use only. If exposed to varying weather conditions before fitting your boards, they are likely to cup, warp and split; the ideal time to fit cladding to keep this to a minimum is between the months of October and April and within 7 to 14 days of delivery.

Please be aware the pictures displayed are for representation only and may not accurately depict the correct dimensions. This particular profile is 142mm x 20mm.

Ready to fix and available in two options - First and Character Grade:

• First Grade is sorted to include only the clearest (most knot free) boards with the straightest grain possible. A perfect choice for all modern and contemporary applications.
• Character Grade will have a mixture of all top four grades, 1 through to 4 - some clear of knots and some straight grain, others with knots and some sloping grain. A perfect choice for all traditional/rustic applications, it gives a less uniformed look, without compromising its excellent durability properties.

End-Matching (Tongue and Groove) will allow you to place joints where they fall, instead of on the stud, allowing you to finish the job more quickly without sacrificing on quality and helps minimise wastage.

We offer the following section size: 

• 142mm x 20mm

Priced per square metre and supplied in random lengths between 1200mm and 3600mm unless otherwise specified for an additional charge:

• Set lengths up to 3500mm - £4.00 extra per square metre exc VAT
• Set lengths above 3500mm - £8.00 extra per square metre exc VAT

This can be done by adding the 'Set lengths (Cladding)' product to your basket (1 quantity = 1 square meter of cladding). You will need the same amount of cladding and set lengths in your basket to get the set lengths that you need so make sure to double check you have added the correct quantity. 

Please contact our Sales Team on 01536 267 107 should you have any issues.

Still unsure? We offer up to two samples of our cladding boards for a £5 inc VAT postage charge. Should you wish to then purchase cladding boards that are the same product as your samples, we will reimburse you the £5 postage charge upon ordering!*

*Terms and Conditions apply