Ground line rot and decay in the upper 150mm or 6” of the ground is the number one cause of fence and gate post pole failure. Postsaver Sleeves make conventional ground line rot and decay in your fence or gate posts impossible, by excluding all the causes of decay.
What Are Postsaver Sleeves?
A Postsaver sleeve is a heat shrinkable thermoplastic sleeve lined with a meltable thermoplastic bituminous liner. These sleeves are heat applied to the post to create a long-lasting air and water tight seal on the ground line section of fence and gate posts, making conventional ground line decay impossible and unlike liquid coatings, Postsaver maintains a barrier to the causes of decay when the post cracks or splits. The sleeve is applied to the post prior to installation.
20 Year Guarantee
Postsaver sleeves are independently tested and proven to perform in high volume use over 24 years in service. A 20 year guarantee is offered against post failure.
How does it benefit me?
Posts protected with Postsaver sleeves have an expected service life of 20 years or more, saving you the time, money and hassle of having to replace rotten fence posts.
Are Postsaver Sleeves Expensive?
No, with sleeve prices from as little as 70p, each Postsaver sleeve is low in cost and highly cost effective, saving you the cost and time of having to replace rotten fence and gate posts
How Do I Apply Sleeves?
Position the sleeve on the post in the correct position
Heat with a gas blowtorch to shrink in place
Roll the sleeve on each side(square posts only)
Our video here will give you guidance on correct application.
What Do I Need to Apply Them?
Roller Kit - (square posts only)
Gas blow torch
How Do I Install Sleeved Posts?
Just like you would do normally. You can power drive, dig and backfill or concrete in place without any problems.
Click here to browse our range of Postsaver Ground Line Sleeves.